108 年 國立清華大學動力機械工程學系碩士班丙組《科技英文》

It is crucial to understand how one form of energy can ______ into another.
(A) convert
(B) converts
(C) be converted
(D) converting
(E) be converting

Curiosity keeps ______ us down new paths.
(A) to lead
(B) lead
(C) for leading
(D) leading
(E) led

Technology is advancing at a rapid speed and engineers need ______ to compete and advance.
(A) to do the same
(B) doing the same
(C) the same
(D) same
(E) to do same

Before ______ to the graduate school, I had to go through an examination.
(A) to admit
(B) being admitted
(C) having been admitted
(D) admitting
(E) admit

I could have done my homework better, if I ______ to school yesterday.
(A) came
(B) have come
(C) come
(D) have came
(E) had come

We believe this malfunction ______ due to poor mechanical design.
(A) are
(B) is
(C) to be
(D) be
(E) was

Hsinchu Science Park ______ an important center for technology development in Taiwan since 1980s.
(A) was
(B) has been
(C) is
(D) had been
(E) had

An engineer must ______ domain knowledge to be successful.
(A) have
(B) has
(C) to have
(D) having
(E) do have

Graphene is one of the earth's strongest ______ ever measured.
(A) material
(B) materials
(C) that
(D) Materials
(E) which was

The experiment will be finished in ______ five weeks.
(A) more
(B) the other
(C) other
(D) less
(E) another

The subject ______ I am most interested is Mechanical Engineering.
(A) in which
(B) in that
(C) in what
(D) in where
(E) whichever

I want to become ______ of National Tsing Hua University.
(A) student
(B) the student
(C) a student
(D) students
(E) new student

The weight of our microrobot is ______ kilogram.
(A) smaller
(B) less
(C) lower than
(D) less than
(E) more little than
(A) a

Industry 4.0 impacts how engineers design products for ______ manufacturing facilities.
(A) increasing smartly
(B) increasing smart
(C) increasingly and smartly
(D) increasingly and smart
(E) increasingly smart

The Porche 959 was ______ street car in the world when introduced in 1987.
(A) a fastest
(B) the most fast
(C) the maximum fast
(D) most fast
(E) the fastest

Physics ______ a very important subject for engineering students.
(A) are
(B) is
(C) was
(D) were
(E) must be

This machine used centrifugal force to separate particles ______.
(A) from
(B) out of
(C) away
(D) to
(E) versus

Carbon dioxide sorbents absorb ______ when cool and release it when heated.
(A) gas
(B) gases
(C) the gas
(D) them
(E) that

In this article, which of the following was NOT considered as key technology of Industry 4.0?
(A) Modeling
(B) Augmented reality
(C) 3D printing
(D) Iterations
(E) Automation

Which of the following best describes the "Big data" for Industry 4.0?
(A) RFID data
(B) Data from big companies
(C) A lot of data
(D) Simulation data
(E) Data collected from IoT

Which of the following is NOT a comment made by the author?
(A) Additive manufacturing can be used to make complex products.
(B) Companies embracing Industry 4.0 must hire data-management scientists.
(C) Modeling/simulation can accelerate product design.
(D) Big data can be useful in marketing
(E) Virtual reality is an important tool in designing medical devices.

Which of the following is irrelevant to Industry 4.0?
(A) Data optimization
(B) Data storage
(C) Data acquisition
(D) Data analysis
(E) None of the above

Jackrabbot is designed to be a ______.
(A) Autonomous drone
(B) Electric car
(C) Pedestrian-like robot
(D) Campus navigator
(E) Highway autonomous car

Which of the following was NOT likely included in the data collected by the research team?
(A) Skateboarders
(B) Shoppers
(C) Dog walkers
(D) Buildings
(E) Sidewalk

Which of the following is the most important component to this research project?
(A) Machine learning
(B) Campus patrolling
(C) Flow of humanity
(D) Human body language
(E) Solving the "last mile problem"

Which subject was NOT mentioned at all by the author in this article?
(A) Automatic control
(B) Computer science
(C) Zoology
(D) Aerodynamics
(E) None of the above

Paragraphs
27. The windmill is a national symbol of the Netherlands, which has for centuries harnessed the fresh breezes coming off the North Sea to pump water and power small industries. It's fitting, then, that a Dutchman was tasked by GE Renewable Energy to manage the design and fabrication of the world's largest wind turbine. (Winters, J. and Saunders, Z., Mechanical Engineering 140 (12), 31, Dec 01, 2018)
(A) The windmill pumps water from the North Sea by GE.
(B) A Dutchman was tasked by GE to make fittings for the world's largest wind turbine.
(C) Wind power from the North Sea has been used for centuries.
(D) Small industries in Netherlands provide power to GE Renewable Energy.
(E) The world's largest windmill is the national symbol of Netherland.

28. Engineers typically build a fuel bed of shredded wood on the floor of the tunnel to replicate sloped terrain. Roof fans pull outside air through heating and cooling coils to adjust its temperature. A large fan blows the conditioned air into an 80-foot-tall burn chamber, where is mixed with the air in the room and is drawn into the wind tunnel at up to 8 miles per hour. (Fellet M., Mechanical Engineering, ASME, Nov. 2018)
    (A) Large roof fans pull the air to outside.
    (B) An 80-foot-tall chamber is air-conditioned.
    (C) Heating and cooling coils are mixed by air flows at 8 miles per hour.
    (D) The wind tunnel is 80-foot-tall.
    (E) The fan is used to cool the wind tunnel.

The microrobot weighs 1.2 g, and the researchers achieved a speed of 2.2 cm per second, with peak velocity across water reaching 8 cm per second. That is much slower than its ground speed of 40 cm per second. (Shah, A., Mechanical Engineering, ASME, Nov. 2018)
(A) The microrobot moves slower than the ground.
(B) The microrobot was moved by the researcher slowly.
(C) In the test, water flows at a peak velocity of 8 cm per second.
(D) The microrobot could move across a 10 cm water trench within 2 seconds.
(E) It takes 40 seconds for the microrobot to move one cm on the ground.

The eyes of mantis shrimp detect ______ types of polarization: horizontal, vertical, and two types each of diagonal and spiral. They have 16 color receptors stacked atop on another. Shorter wavelength receptors go on top and sensors for longer wavelengths, which penetrate tissue ______ on the bottom.
(A) four / more
(B) four / better
(C) six / deep
(D) six / better
(E) six / faster

A control system consists of subsystems and processes (or plants) assembled for the purpose of obtaining a desired output with desired performance, given a specified input. Figure 1.1 shows a control system in its simplest form. For example, consider an elevator. When the fourth-floor button is pressed on the first floor, the elevator rises to the fourth floor with a speed and floor-leveling accuracy designed for passenger comfort. The push of the fourth-floor button is an ______ that represents our desired ______, shown as a step function in Figure 1.2. The performance of elevator can be seen from the elevator response curve in the figure. Two major measured of performance are apparent: the transient response and the steady-state error. In our example, passenger comfort and passenger patience are dependent upon the ______. If this response is too fast, passenger comfort is sacrificed; if too slow, passenger patience is sacrificed. The ______ is another important performance specification since passenger safety and convenience would be sacrificed if the elevator did not ______ properly. (Nise, N. S., Control System Engineering, 7th ed., John Wiley & Sons, 2015)
36. (A) accuracy (B) output (C) assembly (D) input (E) error

A control system consists of subsystems and processes (or plants) assembled for the purpose of obtaining a desired output with desired performance, given a specified input. Figure 1.1 shows a control system in its simplest form. For example, consider an elevator. When the fourth-floor button is pressed on the first floor, the elevator rises to the fourth floor with a speed and floor-leveling accuracy designed for passenger comfort. The push of the fourth-floor button is an ______ that represents our desired ______, shown as a step function in Figure 1.2. The performance of elevator can be seen from the elevator response curve in the figure. Two major measured of performance are apparent: the transient response and the steady-state error. In our example, passenger comfort and passenger patience are dependent upon the ______. If this response is too fast, passenger comfort is sacrificed; if too slow, passenger patience is sacrificed. The ______ is another important performance specification since passenger safety and convenience would be sacrificed if the elevator did not ______ properly. (Nise, N. S., Control System Engineering, 7th ed., John Wiley & Sons, 2015)
37. (A) accuracy (B) output (C) assembly (D) input (E) error

A control system consists of subsystems and processes (or plants) assembled for the purpose of obtaining a desired output with desired performance, given a specified input. Figure 1.1 shows a control system in its simplest form. For example, consider an elevator. When the fourth-floor button is pressed on the first floor, the elevator rises to the fourth floor with a speed and floor-leveling accuracy designed for passenger comfort. The push of the fourth-floor button is an ______ that represents our desired ______, shown as a step function in Figure 1.2. The performance of elevator can be seen from the elevator response curve in the figure. Two major measured of performance are apparent: the transient response and the steady-state error. In our example, passenger comfort and passenger patience are dependent upon the ______. If this response is too fast, passenger comfort is sacrificed; if too slow, passenger patience is sacrificed. The ______ is another important performance specification since passenger safety and convenience would be sacrificed if the elevator did not ______ properly. (Nise, N. S., Control System Engineering, 7th ed., John Wiley & Sons, 2015)
38. (A) measurement (B) steady-state response (C) transient response (D) input (E) steady-state error

A control system consists of subsystems and processes (or plants) assembled for the purpose of obtaining a desired output with desired performance, given a specified input. Figure 1.1 shows a control system in its simplest form. For example, consider an elevator. When the fourth-floor button is pressed on the first floor, the elevator rises to the fourth floor with a speed and floor-leveling accuracy designed for passenger comfort. The push of the fourth-floor button is an ______ that represents our desired ______, shown as a step function in Figure 1.2. The performance of elevator can be seen from the elevator response curve in the figure. Two major measured of performance are apparent: the transient response and the steady-state error. In our example, passenger comfort and passenger patience are dependent upon the ______. If this response is too fast, passenger comfort is sacrificed; if too slow, passenger patience is sacrificed. The ______ is another important performance specification since passenger safety and convenience would be sacrificed if the elevator did not ______ properly. (Nise, N. S., Control System Engineering, 7th ed., John Wiley & Sons, 2015)
39. (A) measurement (B) steady-state response (C) transient response (D) input (E) steady-state error

A control system consists of subsystems and processes (or plants) assembled for the purpose of obtaining a desired output with desired performance, given a specified input. Figure 1.1 shows a control system in its simplest form. For example, consider an elevator. When the fourth-floor button is pressed on the first floor, the elevator rises to the fourth floor with a speed and floor-leveling accuracy designed for passenger comfort. The push of the fourth-floor button is an ______ that represents our desired ______, shown as a step function in Figure 1.2. The performance of elevator can be seen from the elevator response curve in the figure. Two major measured of performance are apparent: the transient response and the steady-state error. In our example, passenger comfort and passenger patience are dependent upon the ______. If this response is too fast, passenger comfort is sacrificed; if too slow, passenger patience is sacrificed. The ______ is another important performance specification since passenger safety and convenience would be sacrificed if the elevator did not ______ properly. (Nise, N. S., Control System Engineering, 7th ed., John Wiley & Sons, 2015)
40. (A) level (B) control (C) measure (D) push (E) step